
5/8” BI-STOP™ | Natural Gas Distribution Utility, Alberta, Canada
STATS Group has developed a mini-version of its BI-STOP pipeline isolation tool to assist Alberta-based ATCO Gas to complete a meter replacement programme in built-up ...
Read the case study

Caisson Securing & Recovery, North Sea, UK
As assets remain in service beyond their planned operational lifespan, caissons will inevitably experience severe external and internal corrosion due to their harsh ...
Read the case study

Riser Securing Clamps | AH001 Ivanhoe Oil Field
Background / Challenge North Sea Floating vessel had been decommissioned Requirement to release multiple flexible risers from the platform for abandonment Serviceability ...
Read the case study

24” Caisson Liner 95m Long | Piper Bravo, North Sea, UK
Caisson Liner during factory acceptance testing and offshore installation
Read the case study

Subsea Mechanical Clamp and Hot Tap Tie-In
18"x12" Subsea Mechanical Clamp, Valve and SureTap Hot Tap Machine
Read the case study

High Integrity Sealing Plugs, Brazil
STATS were approached by a multinational oilfield services company to design and manufacture high integrity, high-flow, ROV hot stab receptacle sealing plugs. In total, ...
Read the case study

10" Subsea Hot Tapping and Plugging, Gulf of Mexico
STATS Group was contracted to assist with the isolation and abandonment of a 10” oil pipeline in the Gulf of Mexico, at a water depth of approximately 25 meters. The ...
Read the case study

14” Subsea Pipeline Isolation & Repair, East China Sea
Following on from the success of significant subsea pipeline isolation and repair projects completed for the 28” Yacheng Pipeline in China and 8” subsea pipeline in the ...
Read the case study

8” Subsea Pipeline Isolation & Repair, Gulf of Thailand
STATS Group was contracted by CUEL Ltd. in June 2016 to assist with the repair of an 8” gas condensate export pipeline, located in the Gulf of Thailand. The pipeline ...
Read the case study

42” Subsea Abandonment Plug, Dubai, UAE
STATS Group were approached by a national oil company in the middle east which had a requirement to isolate a 42” subsea pipeline dead leg housed within an oil storage ...
Read the case study

28" Subsea Pipeline Isolation & Repair, Yacheng Pipeline, China
STATS Group were contracted by COOEC Subsea Technology Co Ltd to provide temporary subsea isolation of the Yacheng pipeline, situated in the South China Sea. The 780 ...
Read the case study

20” Tethered Tecno Plug | North West Hutton Decommissioning
As part of the North West Hutton decommissioning programme, STATS Group were contracted to supply a high pressure pipeline isolation plug to provide a double block and ...
Read the case study