6" to 36" Extended Body Weld Test Tools, France
Patriot International approached STATS Group to provide a range of modified weld test tools from 6" to 36" for an extended period for a pipeline construction project in ...
Read the case study
4-Inch Hot Tap And Line Stop Project For Oil Flowline Recommissioning Project
A challenging remote location at high altitude in the southern highland mountains of Papua New Guinea was the destination for STATS Group’s 4” Hot Tap and Line Stop ...
Read the case study
20” Tethered Tecno Plug, Main Oil Line Nahada to Mina Al Fahal, Oman
Petroleum Development Oman (PDO) had a requirement to remove 14 bends from 20” bypass pipework around block valves on their main oil pipeline while the line remained ...
Read the case study
Mechanical Connectors Aid Rehabilitation of drain systems offshore
24" Mechanical Connector for installation in Norwegian North Sea
Read the case study
12” Remote Tecno Plug Isolation, Valve Changeout, Malaysia
STATS Group was contracted on behalf of E&P O&M Services Sdn Bhd (EPOMS) to provide isolation and reinstatement leak-testing of a 12” shutdown valve on the Larut ...
Read the case study
20” Remote Tecno Plug, Offshore Platform, South China Sea
STATS Group has successfully carried out a double block isolation of a 20” gas pipeline operating at 125 bar in the South China Sea. This is the first time a piggable ...
Read the case study
30” and 36” Hot Tapping and BISEP Isolation, USA
As the oil and gas industry transitions to a low carbon future the use of innovative technology to reduce emissions and ensure efficiency during maintenance and upgrade ...
Read the case study
20” Remote Tecno Plug, Offshore Platform, Bass Strait, Australia
STATS Group provided pipeline isolation services on an offshore platform to allow the safe replacement of a launcher valve, in the Bass Strait, off the coast of ...
Read the case study
Pig Launch Tray Recovery Tool, Pressurised Pipeline, Onshore Terminal
Following the successful completion of an offshore pipeline isolation project, STATS were asked by the client if they could offer a solution to an existing problem of an ...
Read the case study
14” 2500# Subsea Mechanical Connector, North Sea, UKCS
STATS Group provided two class 2500 subsea mechanical connectors as part of a subsea flange repair project in the North Sea, UKCS.
Read the case study
6” BISEP with Integrated Bypass, Perth, Australia
Hot tapping and plugging on a 6” natural gas pipeline to safely re-route a pipeline to allow construction of a new highway, while production was maintained.
Read the case study
12” Remote Tecno Plug, Valve Changeout, Malaysia
STATS Group was contracted on behalf of E&P O&M Services Sdn Bhd (EPOMS) to provide isolation and reinstatement leak-testing of a 12” shutdown valve on the Larut ...
Read the case study